Decibels (dB) calculator
Compare two power levels, or two voltage levels, and see the change in decibels. Or turn a dB figure back into a ratio.
- 1Type your numbersUse the white boxes. Tap an example chip if you want a starting point.
- 2Read the answerThe green panel updates as you type. You cannot edit it.
- 3See whyThe steps below show the formula with your numbers filled in.
Voltage: 1.413×
What this means
Decibels describe a change as a ratio on a logarithmic scale, so big changes become small numbers. Doubling power is about +3 dB. Cutting it in half is about -3 dB. A ten-fold increase is +10 dB.
For voltage, the same change counts double: doubling voltage is about +6 dB, because power goes up with the square of voltage.
Memorize three anchors: 3 dB is double or half, 6 dB is four times or a quarter, 10 dB is ten times or a tenth. Most exam questions need nothing more.
55 questions in the official pools involve this topic:
Common questions
Why is power 10 log and voltage 20 log?
Power is proportional to voltage squared. Taking the logarithm of a square doubles it, so the voltage formula uses 20 instead of 10.
What does a negative dB mean?
A loss. The output is lower than the input, as in a long run of coax cable.
Can I add dB values?
Yes. Gains and losses in a chain add up. A 100 W transmitter, 3 dB of cable loss and 6 dB of antenna gain nets +3 dB overall.